...
DATA ELEMENT OR BUTTON | DESCRIPTION |
Number | allocated on Save |
Parent Project | feature not used since 2006. The “Add Sub-project” Option was removed in 2018 release. Sub-projects can be identified as anything not having Zero in the Project Suffix cd column of M10 |
Revision | Revision Number (corresponds to the Revision number of the AD Publication ) |
Suffix | Not used. Example of an older sub-project where a suffix was allocated 20060127  |
Project Type | Type Becomes unchangeable once the project number is allocated. Default type is “CAW INVESTIGATION”. (TR53_PROJECT_TYPE) Additional input TABs are shown after the initial project SAVE, but the number of TABs varies with project type. ( these tabs are reviewed in detail in the modify section - PTS MODIFY )
TEST PROJECT TYPES IN ACCEPTANCE REGION 20210008 - CAW INVESTIGATION 20210009 - ACCIDENT INVESTIGATION (does not allow attachment of SDR_numbers on Tab1) 20210010 - ATIP (note: ATIP only generates an ATTACHMENT tab on save) (does not allow attachment of SDR_numbers on Tab1) 20210011 - CAA SAFETY RECOMMENDATION (note: the field SR recommendation number (m10) appears on TAB-1 when selecting this option. This tab also requires the selection of a CAA from the dropdown (data found in SIGS) ) 20210012 - CASA 20210013 - FOREIGN PRODUCT SURVEILLANCE 20210014 - GENERAL 20210015 - POLICY DEVELOPMENT (does not include the APPLICABILITY tab after the SAVE ) 20210016 - PROCEDURE DEVELOPMENT (does not include the APPLICABILITY tab after the SAVE ) 20210017 - |
Name | Project name, freeform text |
OPI | Office of Primary Interest/Project originator OTIs (other users with interest in this project can be entered after the initial save) |
Details | freeform text - should ultimately contain any Publication number raised by this project |
Reference | freeform text |
Project Summary | freeform text |
Start Date | date project started |
Due date | due date - if left blank the user receives the following warning  |
Percent completed | estimated percentile of project completion |
Priority code | values  HIGH is normally reserved for Emergency ADs |
Status code | values  Note : will not allow a project to be saved as “closed” unless the percentage complete is set to 100% |
Date completed | completion date |
Closing reason | freeform text |
SAVE | SAVE project |
BACK | go back without SAVE |
