TAB-1 GENERAL
DATA ELEMENT OR BUTTON | DESCRIPTION |
Number | allocated on initial Save |
Parent Project | no longer used - Described in ADD New section |
Revision | Revision Number (corresponds to the Revision number of the AD Publication ) |
Suffix | no longer used - Described in ADD New section |
Project Type | Project Type Becomes unchangeable once the project number is allocated. Values Described in ADD New section |
Name | Project name, freeform text |
OPI | Office of Primary Interest/Project originator |
OTI | Office of Tertiary Interest/Secondary project contributors/other users with interest in this project |
Details | freeform text - should ultimately contain any Publication number raised by this project |
Reference | freeform text |
SDR_number / ADD | user manually enters SDR numbers that apply to this project (number must exist on M72) |
SDR REFERENCE | list of SDR numbers |
MANUFACTURER | SDR product manufacturer (determined from Product code on M72, then data is acquired from M73 by SDR-number, product-code match) |
MODEL | SDR product model |
CATI | Continuing Airworthiness Technical Inspector responsible for this Mfg/model - determined by the Personnel code allocated on Y62 table |
Comments | freeform text |
last updated | last update date |
updated by | name of user who last updated this project |
contact | User phone number (CAWIS userid tables are auto-synced against TC Directory) |
Project Summary | freeform text |
Start Date | date project started |
Due date | due date - if left blank the user receives the following warning regarding the project stats report :  |
Percent completed | estimated percentile of project completion |
Priority code | values  HIGH is normally reserved for Emergency ADs |
Status code | values  Note : will not allow a project to be saved as “closed” unless the percentage complete is set to 100% |
Date completed | completion date |
Closing reason | freeform text |
Lessons Learned button | User can enter any Lessons Learned text  |
Question button | User can send questions to the Project OPI - the OPI receives email notification as well. Tab 2 shows Question history   |
Summary | provides a brief online summary of the project  |
Comprehensive report | provides details of all aspects of this project online  |
SAVE | SAVE project |
BACK | go back without SAVE |
TAB-2 APPLICABILITY
DATA ELEMENT OR BUTTON | DESCRIPTION |
TYPE | mfg/model Product Type (A/E/P/F/S/Q) |
MANUFACTURER | PRODUCT MANUFACTURER |
MODEL | PRODUCT MODEL |
TYPE CERTIFICATE | TATC - TYPE APPROVAL -OR- TYPE CERTIFICATE assigned to this Mfg/model on Y62 |
PRIM | PRIMARY ? Identifies the Primary Mfg/model that concerns this project |
ADD | Add more Product/Mfg/models to the applicability of this project.  |
REMOVE | remove any unwanted models from this project |
JASC1 | Assign JASC/ATA code to this project (JASC code identifies the specific problem area/system of the aircraft) |
JASC2 | assign a 2nd JASC code |
JASC3 | assign a 3rd JASC code |
TAB-3 ATTACHMENTS
TAB-4 BF NOTIFICATIONS
TAB-5 LINKS
TAB-6 CORRECTIVE ACTION
0 Comments